Last updated:
Use this free percentage increase calculator to find the percentage change between two values, or to increase any number by a percentage. Enter the original and new values, press Calculate, and see the percent increase or decrease, the difference and the formula used. Switch to the second tab to add a percentage to a number or take one off.
Percentage increase calculator example
1. Percentage change. A price rises from 50 to 65. The difference is 15, and 15 ÷ 50 × 100 = 30% increase.
2. Increase a number by a percentage. 200 increased by 15% is 200 × 1.15 = 230. Decreased by 15%, it is 200 × 0.85 = 170.
3. Find the original value. A price is 230 after a 15% increase. The original price was 230 ÷ 1.15 = 200. If a price is 80 after a 20% decrease, the original was 80 ÷ 0.8 = 100.
Percentage change is (new − original) ÷ |original| × 100. It cannot be calculated when the original value is 0. The original value is found by dividing the final value by 1 + percentage ÷ 100 (or 1 − percentage ÷ 100 for a decrease). Results are rounded to 4 decimal places.
Quick answer: To find a percentage increase, subtract the original value from the new value, divide the result by the original value, and multiply by 100. For example, an increase from 50 to 65 is (65 − 50) ÷ 50 × 100 = 30%.
How to Use the Percentage Increase Calculator
The calculator has two tabs. Use the first to find a percentage change, and the second to increase or decrease a number by a percentage.
Find the percentage increase between two values
- Open the Percentage change tab. It is selected by default.
- Enter the original value. This is the starting number, such as last year’s price or your old salary.
- Enter the new value. This is the number it changed to.
- Press Calculate. You see the percentage increase or decrease, the difference between the two values and the formula with your numbers. A decrease is shown as a percentage decrease.
Increase or decrease a number by a percentage
- Open the Increase or decrease by % tab.
- Enter your number in the Number field.
- Choose Increase by or Decrease by, then type the percentage. You can also click one of the quick buttons: 5%, 10%, 15%, 20% or 25%.
- Press Calculate. You get the new number, the amount of change and the formula.
Press Enter instead of Calculate if you prefer, and press Reset to clear the fields. To see how it works, click Try example 1 or Try example 2 in the example box below the calculator.
Percentage Increase Formula
The percentage increase formula compares the amount of the increase with the starting value:
Percentage increase = (new value − original value) ÷ original value × 100
There are two parts:
- Amount of increase = new value − original value
- Percentage increase = amount of increase ÷ original value × 100
The original value is always the one that came first. If you mix up the two values, you get a different percentage.
Examples
| Original value | New value | Amount of increase | Calculation | Percentage increase |
|---|---|---|---|---|
| 50 | 65 | 15 | 15 ÷ 50 × 100 | 30% |
| 60 | 75 | 15 | 15 ÷ 60 × 100 | 25% |
| 250 | 260 | 10 | 10 ÷ 250 × 100 | 4% |
| 40 | 100 | 60 | 60 ÷ 40 × 100 | 150% |
| 500 | 1,500 | 1,000 | 1,000 ÷ 500 × 100 | 200% |
Notice that the first two rows have the same amount of increase (15) but different percentages. The same increase is a bigger percentage when it is added to a smaller starting value.
A percentage increase can be larger than 100%. When a value more than doubles, as in the last two rows, the increase is greater than the original value.
If the result is negative, the value went down, so it is a percentage decrease. For example, a fall from 65 to 50 is a 23.08% decrease. The next sections explain this in more detail.
How to Calculate Percentage Increase by Hand
You do not need a calculator to find a percentage increase. Follow these three steps:
- Subtract the original value from the new value. This gives the amount of the increase.
- Divide that amount by the original value. This gives the increase as a decimal.
- Multiply by 100 and add the % sign.
Example 1: A price increase
A streaming subscription goes up from $12.50 to $14.00 a month. What is the percentage increase?
- $14.00 − $12.50 = $1.50
- $1.50 ÷ $12.50 = 0.12
- 0.12 × 100 = 12%
The price increased by 12%.
Example 2: A salary increase
Your salary rises from $48,000 to $51,600 a year.
- $51,600 − $48,000 = $3,600
- $3,600 ÷ $48,000 = 0.075
- 0.075 × 100 = 7.5%
Your pay increased by 7.5%.
Tips
- Always divide by the original value, not the new one. This is the most common mistake.
- Convert the decimal to a percentage at the end. 0.12 means 12%, and 0.075 means 7.5%.
- Round only at the end. If the division does not come out evenly, keep the extra digits until the last step.
You can check either example by entering the numbers in the calculator above.
How to Increase a Number by a Percentage
Sometimes you already know the percentage and want the new number. This is how you add a raise to a salary, a tax to a price, or a markup to a cost. The calculator’s Increase or decrease by % tab does it for you.
New value = original value × (1 + percentage ÷ 100)
Turn the percentage into a multiplier: 4% becomes 1.04, 8% becomes 1.08, and 25% becomes 1.25. Then multiply.
Example 1: A rent increase
Your rent is $1,800 a month and goes up by 4%.
- Multiplier: 1 + 4 ÷ 100 = 1.04
- New rent: $1,800 × 1.04 = $1,872
The increase is $72 a month.
Example 2: Adding sales tax
A $240 item has 8% sales tax added.
- Multiplier: 1 + 8 ÷ 100 = 1.08
- Total: $240 × 1.08 = $259.20
The tax is $19.20.
The two-step method
You can also work it out in two steps:
- Find the percentage of the number: original value × percentage ÷ 100.
- Add the result to the original value.
For the rent example, 4% of $1,800 is $72, and $1,800 + $72 = $1,872. Both methods give the same answer.
To decrease a number by a percentage, subtract instead: multiply by (1 − percentage ÷ 100). For example, 200 decreased by 15% is 200 × 0.85 = 170.
Percentage Increase vs Percentage Decrease vs Percentage Change
These three terms are closely related, and they often appear in the same calculation.
- Percentage increase means the new value is higher than the original value.
- Percentage decrease means the new value is lower than the original value.
- Percentage change is the general term. It covers both directions: a positive result is an increase, and a negative result is a decrease.
They all use the same formula:
Percentage change = (new value − original value) ÷ original value × 100
When the new value is smaller, the top part of the fraction is negative, so the result is negative. A negative result simply means a decrease. When you report it, drop the minus sign and say “decrease.”
| Original value | New value | Percentage change | In words |
|---|---|---|---|
| 200 | 250 | +25% | 25% increase |
| 200 | 150 | −25% | 25% decrease |
| 50 | 65 | +30% | 30% increase |
| 65 | 50 | −23.08% | 23.08% decrease |
The last two rows use the same pair of numbers in opposite directions, and the percentages are different. That is because the original value, the number you divide by, is different each time. A rise from 50 to 65 is 30%, but a fall from 65 to 50 is only 23.08%.
You do not have to decide which term applies. The Percentage change tab of the calculator above labels the result as an increase, a decrease or no change automatically.
Percentage difference is something else
Percentage difference compares two values when neither one is the “original,” such as two prices from two different stores. It divides the gap by the average of the two values instead of by the starting value. For 50 and 65, the percentage difference is 15 ÷ 57.5 × 100 = 26.09%, which is not the same as the 30% increase. Use percentage increase when one value clearly came first.
Why +20% Then −20% Does Not Return to the Start
This is one of the most common surprises with percentages. If a number goes up by 20% and then down by 20%, you do not end up where you began.
Example: start with 100.
- Increase by 20%: 100 × 1.20 = 120
- Decrease by 20%: 120 × 0.80 = 96
You finish at 96, which is a 4% decrease from the start.
The reason is that the second percentage is taken from a different number. The 20% increase is 20% of 100, which is 20. The 20% decrease is 20% of 120, which is 24. The decrease is larger, so you end up below the starting point.
| Start | First change | Result | Second change | Final result | Net change |
|---|---|---|---|---|---|
| 100 | +20% | 120 | −20% | 96 | −4% |
| 100 | +50% | 150 | −50% | 75 | −25% |
| 100 | −20% | 80 | +20% | 96 | −4% |
How much do you need to get back?
To undo an increase, the decrease must be smaller than the increase. To undo a decrease, the increase must be larger.
| After a change of | You need to change by | To get back to the start |
|---|---|---|
| +10% | −9.09% | 100 → 110 → 100 |
| +20% | −16.67% | 100 → 120 → 100 |
| +50% | −33.33% | 100 → 150 → 100 |
| −20% | +25% | 100 → 80 → 100 |
The formula for undoing an increase of p% is p ÷ (100 + p) × 100. For +20%, that is 20 ÷ 120 × 100 = 16.67%.
Where this matters
- Prices: a 20% markup followed by a 20% discount does not bring back the original price.
- Salaries: a pay cut followed by a raise of the same percentage leaves you with less than you started with.
- Investments: a loss of 50% needs a gain of 100% to break even.
You can test any of these in the calculator. Increase 100 by 20% in the second tab, then decrease the result by 20%.
Percentage Increase vs Percentage Points
When the numbers you compare are already percentages, such as interest rates or market share, two different measurements are possible. People often mix them up.
- Percentage points show the simple difference between two percentages.
- Percentage increase shows the relative change, compared with the starting percentage.
Example: a savings account rate rises from 4% to 5%.
- Difference in percentage points: 5 − 4 = 1 percentage point
- Percentage increase: (5 − 4) ÷ 4 × 100 = 25%
Both statements are true. The rate went up by 1 point, and it is 25% higher than before. Which one you use depends on what you want to say, and headlines often use the bigger number.
| Starting rate | New rate | Change in percentage points | Percentage increase |
|---|---|---|---|
| 4% | 5% | +1 point | 25% |
| 2% | 3% | +1 point | 50% |
| 20% | 30% | +10 points | 50% |
| 10% | 8% | −2 points | −20% (a 20% decrease) |
The same change in points can look very different in relative terms. Moving from 2% to 3% is only one point, yet it is a 50% increase, because the starting value was small.
Which one does the calculator show?
The percentage increase calculator gives you the relative change. If you enter 4 as the original value and 5 as the new value, you get a 25% increase. For the change in percentage points, subtract the two values yourself: 5 − 4 = 1 point.
When you write about rates or shares, say which one you mean. “Rates rose by 1 percentage point” and “rates rose by 25%” describe the same change, but they sound very different.
Special Cases: Starting from Zero and Negative Numbers
When the original value is 0
You cannot calculate a percentage increase from zero, because the formula divides by the original value, and dividing by zero is undefined. Going from 0 to 25 has no percentage increase, even though the value clearly went up.
In this case, report the amount of change instead, for example “sales rose from 0 to 25 units.” If you enter 0 as the original value, the calculator shows a message explaining this rather than a wrong number.
When a value is negative
The formula still works with negative numbers, but the original value is replaced by its absolute value, meaning its size without the minus sign:
Percentage change = (new value − original value) ÷ |original value| × 100
Using the absolute value keeps the sign of the result correct. A positive result always means the number moved up, and a negative result always means it moved down.
| Original value | New value | Calculation | Result |
|---|---|---|---|
| −50 | −25 | (−25 − (−50)) ÷ 50 × 100 | +50% |
| −40 | −60 | (−60 − (−40)) ÷ 40 × 100 | −50% |
| −10 | 5 | (5 − (−10)) ÷ 10 × 100 | +150% |
| 20 | −10 | (−10 − 20) ÷ 20 × 100 | −150% |
Without the absolute value, the first row would divide by −50 and give −50%, a wrong answer that says the value fell when it actually rose.
Be careful when you read these results. A move from −50 to −25 is a gain of 25 units, but the numbers are still below zero. For measures like profit and loss, temperatures or account balances, it is often clearer to state the amount of change as well as the percentage.
When the value does not change
If the new value equals the original value, the difference is zero and the result is 0%. The calculator shows “No change (0%).”
How to Calculate Percentage Increase in Excel and Google Sheets
The same formulas work in Excel and Google Sheets. Put the original value in cell A1 and the new value in cell B1.
| What you want | Formula | Result for 50 and 65 |
|---|---|---|
| Percentage increase | =(B1-A1)/A1 | 0.3 (30% after formatting) |
| Percentage increase with negative values | =(B1-A1)/ABS(A1) | 0.3 (30% after formatting) |
| Amount of increase | =B1-A1 | 15 |
| Avoid an error when A1 is 0 | =IF(A1=0,"",(B1-A1)/ABS(A1)) | 0.3 |
Format the result as a percentage. The formula returns a decimal, so 0.3 appears until you format the cell. In Excel, select the cell and click the % button on the Home tab, or press Ctrl+Shift+5. In Google Sheets, click the Format as percent button in the toolbar. Then 0.3 shows as 30%.
Increase or decrease a number by a percentage
Put the number in A1 and the percentage in B1. Type the percentage with the % sign, such as 15%.
| What you want | Formula | Result for 200 and 15% |
|---|---|---|
| Increase by a percentage | =A1*(1+B1) | 230 |
| Decrease by a percentage | =A1*(1-B1) | 170 |
If you type 15 without the % sign, divide by 100 in the formula: =A1*(1+B1/100).
Apply the formula to a whole column
If you have a list of values, such as monthly sales, enter the formula in the first row, then drag the small square at the bottom-right corner of the cell down the column. The cell references adjust for each row.
For a one-off answer, the calculator above is quicker, and it also shows the amount of change and the formula for your numbers.
A percentage increase tells you how much something has grown compared with where it started. That makes it useful in many everyday situations.
Common Uses of a Percentage Increase Calculator
| Situation | Original | New | Percentage increase |
|---|---|---|---|
| Salary raise | $52,000 | $55,640 | 7% |
| Price increase | $84 | $92.40 | 10% |
| Investment value | $36.50 a share | $43.80 a share | 20% |
| Test scores | 72 | 81 | 12.5% |
| Website visitors | 8,000 a month | 10,000 a month | 25% |
| Population | 250,000 | 262,500 | 5% |
How each use works
Salary and pay. Compare your old and new pay to see the size of a raise. Then compare it with the rate of inflation to see whether your buying power really went up.
Prices and costs. Track a price rise on groceries, rent, fuel or a subscription. The second tab also works the other way: if a supplier announces a 6% increase, enter your current cost to see the new price.
Investments. Compare the price you paid with today’s price. This shows the change in price only. It does not include fees, taxes or dividends, and past results do not predict future ones.
School and exams. Measure how much a score improved between two tests.
Business and marketing. Compare sales, customers, followers or visitors from one period to the next. Always compare the same length of time, such as month to month or year to year.
Population and statistics. Express growth in people, households or any other count as a percentage so that places of different sizes can be compared fairly.
For any of these, enter the earlier value as the original and the later value as the new value.
Frequently Asked Questions
How do you calculate percentage increase?
Subtract the original value from the new value, divide the result by the original value, and multiply by 100. For example, an increase from 50 to 65 is (65 − 50) ÷ 50 × 100 = 30%. You can also enter both values in the Percentage change tab of the calculator above.
How do I increase a number by a percentage?
Multiply the number by 1 plus the percentage written as a decimal. To increase 200 by 15%, calculate 200 × 1.15 = 230. The Increase or decrease by % tab does this for you and shows the amount of change.
What is the difference between percentage increase and percentage change?
Percentage change is the general term. A positive result is an increase, and a negative result is a decrease. Percentage increase refers only to the case where the new value is higher than the original value.
How do you calculate percentage decrease?
Use the same formula. A negative result means the value went down. For example, a fall from 200 to 150 is (150 − 200) ÷ 200 × 100 = −25%, which is a 25% decrease.
Can a percentage increase be more than 100%?
Yes. A 100% increase means the value doubled, such as 50 to 100. A 300% increase means the value became four times as large, such as 20 to 80. There is no upper limit for an increase, but a decrease cannot go beyond 100% unless the value becomes negative.
Why can’t I calculate a percentage increase from zero?
The formula divides by the original value, and you cannot divide by zero. From 0 to 25 there is no percentage increase, so report the change as an amount instead, for example “up by 25.”
Why does a 20% increase followed by a 20% decrease not return me to the start?
Because the second percentage is taken from a different number. Starting at 100, a 20% increase gives 120, and a 20% decrease of 120 gives 96. To get back to 100 from 120, you need a decrease of 16.67%.
How do I find the original number before a percentage increase?
Divide the new value by 1 plus the percentage written as a decimal. If a price is 230 after a 15% increase, the original price was 230 ÷ 1.15 = 200. You can check the answer in the calculator’s second tab: 200 increased by 15% gives 230.
